| 电刷镀Fe-Re对20CrMnTi钢疲劳性能的影响 |
| |
| 引用本文： | 刘稳善,张天明,解培民. 电刷镀Fe-Re对20CrMnTi钢疲劳性能的影响[J]. 表面技术, 2004, 33(5): 24-26 |
| |
| 作者姓名： | 刘稳善 张天明 解培民 |
| |
| 作者单位： | 长安大学工程机械学院,陕西,西安,710064 |
| |
| 摘 要： | 通过20CrMnTi钢经电刷镀Fe-Re、电刷镀Fe和离子硫碳氮共渗处理的对比试验,分析了其疲劳前后的硬度变化、疲劳断口形貌、疲劳源的位置和过渡层的强度等问题.结果表明,20CrMnTi钢经Fe-Re电刷镀可显著提高弯曲疲劳强度,比电刷镀Fe和离子硫碳氮共渗分别提高了9.9%和21.9%,增加了刷镀层的厚度,提高了过渡层强度,并使疲劳源位置向心部推移,从而有效地增强了20CrMnTi钢的疲劳强度和超负荷持久性.
|
| 关 键 词： | 刷镀 稀土粉末 疲劳源 疲劳强度 电刷镀 疲劳性能 影响 steel Characteristics Fatigue Brush Plating 持久性 超负荷 增强 厚度 刷镀层 离子硫碳氮共渗 疲劳强度 弯曲 结果 问题 过渡层 位置 疲劳源 |
| 文章编号： | 1001-3660(2004)05-0024-03 |
Effects of Brush Plating Fe-Re on Fatigue Characteristics of 20CrMnTi steel |
| |
| LIU Wen-shan,ZHANG Tian-ming,XIE Pei-min. Effects of Brush Plating Fe-Re on Fatigue Characteristics of 20CrMnTi steel[J]. Surface Technology, 2004, 33(5): 24-26 |
| |
| Authors: | LIU Wen-shan ZHANG Tian-ming XIE Pei-min |
| |
| Abstract: | According to compare the fatigue strength of 20CrMnTi steel which have be treated by brush plating Fe-Re,brush plating Fe and ionic sulpho-carba-nitriding, the hardness changes before and after treatment, the form of fatigue fracture area, the position of fatigue source as well as the strength of transition layer are analyzed. The results show that bend fatigue strength can be increased by Fe-Re brush plating on 20CrMnTi; bend fatigue strength increases by 9.9% by Fe-Re brush plating than by Fe brush plating, and by 21.9% than by ionic sulpho-carba-nitriding. The depth of brush plating and the strength of transition layer can be increased. The position of fatigue source is shifted to the core, and the fatigue strength and the overload endurance can be increased effectively. |
| |
| Keywords: | Brush plating Rare-earth powder Fatigue source Fatigue strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
