CO2‐Switchable Oil/Water Emulsion for Pipeline Transport of Heavy Oil

By mixing an aqueous solution of tertiary amine, N,N‐dimethylethanolamine (DMEA), with naphthenic acid (RCOOH) derived from heavy oil, a CO₂ switchable zwitterionic surfactant (RCOO^?DMEAH⁺) aqueous system was constructed. The CO₂ switchability of this zwitterionic surfactant was confirmed by visual inspection, pH measurements, and conductivity tests, i.e., the RCOO^?DMEAH⁺ decomposed into RCOOH, DMEAH⁺ and HCO₃^? after bubbling CO₂ through but switched back to its original state by subsequent bubbling N₂ through at 80 °C to remove the CO₂. The interfacial tension tests of heavy oil in DMEA aqueous solutions indicated that the solution containing 0.5 wt% of DMEA and 0.2 wt% of NaCl resulted in the lowest interfacial tension. The O/W emulsion formed when aqueous solutions of DMEA were used to emulsify heavy oil exhibited the best performance when the oil/water volume ratio, DMEA concentration, and NaCl concentration were 65:35, 0.5 and 0.2 wt%, respectively. The feasibility of pipeline transport of the O/W heavy oil emulsion was evaluated. The results illustrated that the demulsification of the O/W emulsion after transport could be easily realized by bubbling CO₂ through. Although demulsification efficiency still needs to be improved, the recycling of the aqueous phase after demulsification by removal of CO₂ looks promising.