| 小孔径大深度长锥孔的刀具设计 |
| |
| 引用本文： | 胡齐兵,赵晓梅.小孔径大深度长锥孔的刀具设计[J].重型机械科技,2000(2):15-20. |
| |
| 作者姓名： | 胡齐兵 赵晓梅 |
| |
| 作者单位： | 胡齐兵（中国第二重型机械集团公司）
赵晓梅（中国第二重型机械集团公司） |
| |
| 摘 要： | 介绍对承受超高压小孔径大深度长锥孔进行分段加工，保证相邻段必须是凸棱状相交的刀具设计方法。
|
| 关 键 词： | 内锥孔 分段加工 凸棱状对接成型刀具 |
| 修稿时间： | 1999年12月28 |
The Design of the long tapered hole tool with small aperture and big depth |
| |
| China National Erzhong Group Co. Hu Qibing Zhao Xiaomei.The Design of the long tapered hole tool with small aperture and big depth[J].Heavy Machinery Science and Technology,2000(2):15-20. |
| |
| Authors: | China National Erzhong Group Co Hu Qibing Zhao Xiaomei |
| |
| Affiliation: | China National Erzhong Group Co. Hu Qibing Zhao Xiaomei |
| |
| Abstract: | This paper introduces the design method of the tool,to ensure the tool must be convex prism intersected between the adjacent segments by segmental machining the long tapered hole with small aperture and big depth bearing super high pressure. |
| |
| Keywords: | inner tapered hole segmental machining convex prism butt joint forming tool |
| 本文献已被 CNKI 等数据库收录！ |
