Q值及变形量对中强钛合金冷轧管材表面质量的影响 |
| |
引用本文: | 朱康平,杨亚社,席锦会.Q值及变形量对中强钛合金冷轧管材表面质量的影响[J].钛工业进展,2012,29(4):31-34. |
| |
作者姓名: | 朱康平 杨亚社 席锦会 |
| |
作者单位: | 西部钛业有限责任公司,陕西 西安,710201 |
| |
摘 要: | 针对TA18、TA22两种中强钛合金,对比了轧制Q值及轧制变形量对再结晶退火后管材质量的影响.结果表明,TA18和TA22管材获得内外表面均光洁、无缺陷的最适宜的工艺参数为:TA18变形量ε≤57%,且Q≤1.17;TA22变形最ε≤52%,且Q≤1.02.当TA18和TA22管材的变形量分别大于57%和52%、Q值分别大于1.17和1.12,则在其内表面或外表面产生微裂纹,且裂纹随变形量和Q值的增大而加深.
|
关 键 词: | TA18钛合金 TA22钛合金 表面质量 Q值 变形量 |
Effects of Q Value and Deformation on Surface Quality of Moderate- Strength Cold- Rolled Titanium Alloy Tubes |
| |
Authors: | Zhu Kangping Yang Yashe Xi Jinhui |
| |
Affiliation: | (Western Titanium Technologies Co.,Ltd.,Xi’an 710016,China) |
| |
Abstract: | In this study,effects of different deformation and Q values on surface quality of TA18 and TA22 tubes were investigated.The results show that Q value has major impact on the quality of cold-rolled tubes.TA18 tubes have optimal quality when the Q value and deformation are below 1.17 and 57%,while TA22 tubes have the best quality when the Q value and deformation are below 1.12 and 52%.When the deformation of TA18 and TA22 tubes is over 57% and 52%,and the Q value is over 1.17 and 1.12 respectively,the micro-cracks will appear on the inner or external surface.The cracks deepen with deformation and the Q value increased. |
| |
Keywords: | TA18 alloy TA22 alloy surface quality Q value deformation |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|