| 基于CAE的轿车零件注射模具优化设计 |
| |
| 引用本文： | 钱应平,黄菊华,周细枝,者凌秋.基于CAE的轿车零件注射模具优化设计[J].塑料工业,2011,39(1). |
| |
| 作者姓名： | 钱应平 黄菊华 周细枝 者凌秋 |
| |
| 作者单位： | 1. 湖北工业大学机械工程学院,湖北,武汉,430068
2. 湖北工业大学土木与建筑工程学院,湖北,武汉,430068 |
| |
| 摘 要： | 以汽车零件为研究对象,利用CAE技术及注塑模具CAD技术,借助Moldflow和PRO/E软件,建立了产品的三维实体模型,在产品的结构工艺性和成型性分析的基础上,进行了产品成型过程的模拟分析,获得了优化的成型方案和参数,并利用PROE/E模块EMX进行了模具结构的三维优化设计。
|
| 关 键 词： | 计算机辅助工程 注塑模具 优化设计 |
Optimization Design of Injection Mould of Car Parts Based on CAE |
| |
| QIAN Ying-ping,HUANG Ju-hua,ZHOU Xi-zhi,ZHE Ling-qiu.Optimization Design of Injection Mould of Car Parts Based on CAE[J].China Plastics Industry,2011,39(1). |
| |
| Authors: | QIAN Ying-ping HUANG Ju-hua ZHOU Xi-zhi ZHE Ling-qiu |
| |
| Affiliation: | QIAN Ying-ping1,HUANG Ju-hua2,ZHOU Xi-zhi1,ZHE Ling-qiu1(1.School of Mechanical Engineering,Hubei University of Technology,Wuhan 430068,China,2.School of Civil and Architectural Engineering,China) |
| |
| Abstract: | In this paper,the car part was used as study object,the CAE and injection mold CAD technology were used,and the three dimension model of product was established by the Moldflow and PRO/E.The optimized molding methods and parameters were obtained based on the analysis of structure process and molding characteristics and the three dimension optimizing design of mould structure was finished by using the EMX module in PRO/E. |
| |
| Keywords: | CAE Injection Mold Optimization Design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
