ELECTROCHEMICAL RECOVERY OF CHLORINE AND HYDROGEN FROM HYDROGEN CHLORIDE BY-PRODUCT PRODUCED IN THE PETROCHEMICAL INDUSTRY |
| |
| Authors: | A Sattari S Esmaeily Shoja Bonab Sh AmirMahmoodi |
| |
| Affiliation: | 1. Fertilizer and Inorganic Research Department, Chemistry and Petrochemicals Division, Research Institute of Petroleum Industry , Tehran , Iran;2. Lab of Materials, Islamic Azad University, Bonab Branch , Bonab , Iran;3. Research Laboratory of Nanoporous Materials, Faculty of Chemistry, Iran University of Science and Technology , Narmak , Tehran , Iran |
| |
| Abstract: | Simultaneous production of hydrogen as an energy carrier and chlorine as a valuable chemical from recycled hydrogen chloride was investigated employing a lab-scale membrane electrolysis setup. The effects of various process parameters including current density (1–4 kA m?2), cell temperature (45°–75°C), flow rate of hydrochloric acid feed (200–500 mL min?1), and concentration of acid (18–21 wt.%) on the cell voltage and chlorine current efficiency (ChCE) were studied. The Taguchi design of experiments (L16 array) was employed to design the minimum number of experiments necessary to fully study the process. A filter press type cell of 10 cm2 surface area comprising a DSA anode, an alloy of predominantly nickel cathode and Nafion 115 membrane, was used. It was observed that increasing anolyte flow rate, anolyte concentration, or cell temperature caused a decrease in cell voltage and an increase in ChCE, while increasing current density linearly increased cell voltage and decreased ChCE. |
| |
| Keywords: | Dimensionally stable anode Hydrogen chloride Membrane electrolysis Taguchi method |
|
|
