MODIFIED PLANTAIN PEEL AS CELLULOSE-BASED LOW-COST ADSORBENT FOR THE REMOVAL OF 2,6-DICHLOROPHENOL FROM AQUEOUS SOLUTION: ADSORPTION ISOTHERMS,KINETIC MODELING,AND THERMODYNAMIC STUDIES

In this study, the feasibility of using modified plantain peel to remove 2,6-dichlorophenol from iaqueous solutions was investigated under batch mode. The effects of physical factors such as initial 2,6-dichlorophenol concentration, contact time, biosorbent particle size, biosorbent dosage and temperature on the removal process were evaluated. The results showed that biosorption of 2,6-dichlorophenol was dependent on these factors. The equilibrium biosorption data were analyzed by the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) adsorption isotherm models. The four tested isotherm models provided good fits to the experimental data obtained at 30°C; however, the Freundlich isotherm model provided the best correlation (R² = 0.9874) of the experimental data. The maximum monolayer biosorption capacity (Q _max ) was found to be 14.25 mg/g. The biosorption kinetics data of 2,6-dichlorophenol were analyzed by pseudo-first-order, pseudo-second-order, Elovich, intraparticle diffusion, and liquid film diffusion models. The five kinetic models fitted well to the biosorption kinetic data; however, the pseudo-second-order kinetic model gave the best fit when the biosorption mechanism was controlled by film diffusion. Thermodynamic quantities such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), standard entropy change of biosorption (ΔS°), and activation energy (E_a) were evaluated, and it was found that the biosorption process was spontaneous, feasible, endothermic in nature and of dual nature, physisorption and chemisorption; however, the physisorption process was dominant. Therefore, modified plantain peel has potential for application as an effective bioadsorbent for removal of 2,6-dichlorophenol from aqueous solution.