Notch Impact Behavior of Oxide-Dispersion-Strengthened (ODS) Fe20Cr5Al Alloy |
| |
Authors: | J Chao C Capdevila M Serrano A Garcia-Junceda J A Jimenez G Pimentel E Urones-Garrote |
| |
Affiliation: | 1. Department of Physical Metallurgy, Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC), 28040, Madrid, Spain 2. Structural Materials Division, Technology Department, CIEMAT, Avda de la Complutense 22, 28040, Madrid, Spain 3. Universidad Complutense de Madrid, Centro Nacional de Microscopía Electrónica (CNME), 28040, Madrid, Spain
|
| |
Abstract: | In this article, tensile tests as well as LS and LT notched Charpy impact tests were performed at the temperature range between 77 K (?196 °C) and 473 K (200 °C) on an oxide-dispersion-strengthened (ODS) Fe20Cr6Al0.5Y2O3 hot-rolled tube. The absorbed energy values in the range of high temperatures of LS notched specimens are considerably higher than those of LT notched specimens; however, such values tend to converge as temperature increases. Ductile fracture on the normal planes to RD with delaminations parallel to the tube surface was observed in the temperature range between room temperature (RT) and 473 K (200 °C). Delaminations of crack divider type were observed in LT specimens, whereas delaminations of crack arrester type were observed in LS specimens. The yttria particles in the grain boundaries and the transverse plastic anisotropy are the possible reasons why the delaminations were parallel to the tube surface. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|