| 嵌入式平台QR码译码程序的移植方法 |
| |
| 引用本文： | 杨柏松,高美凤.嵌入式平台QR码译码程序的移植方法[J].计算机系统应用,2016,25(3):164-169. |
| |
| 作者姓名： | 杨柏松 高美凤 |
| |
| 作者单位： | 江南大学 物联网工程学院, 无锡 214122,江南大学 物联网工程学院, 无锡 214122 |
| |
| 摘 要： | 给出一种嵌入式平台QR码译码程序的移植方法.选用UP-NETARM2410-S嵌入式平台作为硬件开发平台,首先介绍了系统的硬件平台的组成,然后,对使用Qt-Creator进行QR码译码程序的开发的具体流程进行详细的介绍,测试阶段,利用qvfb虚拟屏,对程序在开发平台的运行情况进行模拟.最后,将程序向嵌入式平台移植.测试结果表明,译码程序能够在嵌入式平台正常运行,并能进行QR码的译码.所提出的移植方法,对于不同平台QR码译码程序移植有一定的借鉴意义.
|
| 关 键 词： | UP-NETARM2410-S嵌入式平台 QR码译码程序 Qt-Creator qvfb虚拟屏 移植 |
| 收稿时间： | 2015/6/27 0:00:00 |
| 修稿时间： | 2015/8/17 0:00:00 |
Transplantation Method of QR Code Decoding Program Based on Embedded Platforms |
| |
| YANG Bai-Song and GAO Mei-Feng.Transplantation Method of QR Code Decoding Program Based on Embedded Platforms[J].Computer Systems& Applications,2016,25(3):164-169. |
| |
| Authors: | YANG Bai-Song and GAO Mei-Feng |
| |
| Affiliation: | School of IoT Engineering, Jiangnan University, Wuxi 214122, China and School of IoT Engineering, Jiangnan University, Wuxi 214122, China |
| |
| Abstract: | A transplantation method of QR code decoding program based on embedded platform was presented. The UP-NETARM2410-S was selected as the hardware development platform. Firstly, the system hardware composition was given. Then, the whole development process of QR code decoding program using Qt-Creator was introduced in detail. In the test phase, in order to simulate the running state of QR code decoding, the qvfb visual screen was used. Finally, the program was transplanted to true embedded platform. Test results showed that the decoding program can run normally on the embedded platform and correctly decode QR code information. The proposed transplantation method may have certain reference significance for different platforms QR code decoding. |
| |
| Keywords: | UP-NETARM2410-S embedded platform QR code decoding program Qt-Creator qvfb visual screen transplant |
|
| 点击此处可从《计算机系统应用》浏览原始摘要信息 |
|
点击此处可从《计算机系统应用》下载全文 |
|
