首页 | 本学科首页   官方微博 | 高级检索  
     

耐热助剂和硫化助剂对丁腈橡胶耐热性能的影响
引用本文:翁国文,刘琼琼,杨慧,花庆玲.耐热助剂和硫化助剂对丁腈橡胶耐热性能的影响[J].橡胶科技市场,2014(3):17-22.
作者姓名:翁国文  刘琼琼  杨慧  花庆玲
作者单位:徐州工业职业技术学院徐州市特种弹性体应用研究重点实验室,江苏 徐州221140
摘    要:研究耐热助剂氧化镁和甲基丙烯酸镁(MMG)、助交联剂三烯丙基异氰脲酸酯(TAIC)、N,N'-间亚苯基双马来酰亚胺(HVA-2)和硫黄对过氧化物硫化体系丁腈橡胶(NBR)耐热性能的影响。结果表明:氧化镁和MMG可以提高胶料的耐热性能,二者单用或并用的适合用量均为7~12份;助交联剂TAIC和HVA-2可以提高胶料的耐热性能,用量为1~2份较好;硫黄不适合用作过氧化物硫化的耐热NBR助交联剂。

关 键 词:丁腈橡胶  耐热助剂  助交联剂  耐热性能

Influence of Heat Resistant Additives and Curing Co-agents on the Heat Resistance of NBR
Weng Guowen,Liu Qiongqiong,Yang Hui,Hua Qingling.Influence of Heat Resistant Additives and Curing Co-agents on the Heat Resistance of NBR[J].China Rubber Science and Technology Market,2014(3):17-22.
Authors:Weng Guowen  Liu Qiongqiong  Yang Hui  Hua Qingling
Affiliation:( Xuzhou Key Laboratory of Application Research of Specialty Elastomers, Xuzhou College of Industrial Technical, Xuzhou 221140, China )
Abstract:The inlfuence of heat resistant additives, curing co-agents and sulfur on the heat resistance of NBR was investigated in this study. The heat resistant additives were magnesium oxide and magnesium methacrylate (MMG), and the curing co-agents included triallyl isocyanurate (TAIC), N, N'-m-phenylene bismaleimide (HVA-2). The experimental results showed that, the heat resistance of NBR could be improved by addition of heat resistant additives and their blend, and the optimum addition level is 7-12 phr. It could also be improved by 1~2 phr of co-agent TAIC, or HVA-2. However, sulfur was not effective to improve the heat resistance of peroxide cured NBR.
Keywords:NBR  heat resistant additives  curing co-agents  heat resistance
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号