| 焊接接头断裂抵抗力工程估计方法的数值研究 |
| |
| 引用本文： | 张敏,马博,周永欣.焊接接头断裂抵抗力工程估计方法的数值研究[J].焊接学报,2005,26(1):32-36,40. |
| |
| 作者姓名： | 张敏 马博 周永欣 |
| |
| 作者单位： | 西安理工大学,材料科学与工程学院,西安,710048;西安理工大学,材料科学与工程学院,西安,710048;西安理工大学,材料科学与工程学院,西安,710048 |
| |
| 基金项目： | 陕西省教育厅自然科学基金资助项目(01JK134) |
| |
| 摘 要： | 针对符合幂硬化性能的材料所连接而成的焊接接头，采用有限元计算方法，讨论了平面应变状态下，不同裂纹几何及材料组配的中心裂纹焊接接头的载荷与位移曲线。在此基础上，应用柔度变化率方法分析了各种组配接头的断裂性能，进一步通过曲线拟合的方法，得到了适合于焊接接头断裂韧度值的工程估算方法。
|
| 关 键 词： | 焊接接头 断裂韧度 柔度变化率方法 有限元 |
| 文章编号： | 0253-360X(2005)01-32-06 |
| 收稿时间： | 2004/1/14 0:00:00 |
Numtrical study on engineering estimate method of fracture resist-ance of welded joints |
| |
| ZHANG Min,MA Bo and ZHOU Yong-xin.Numtrical study on engineering estimate method of fracture resist-ance of welded joints[J].Transactions of The China Welding Institution,2005,26(1):32-36,40. |
| |
| Authors: | ZHANG Min MA Bo and ZHOU Yong-xin |
| |
| Affiliation: | School of Material Science and Engineering, Xi''an University of Technology, Xi''an 710048, China,School of Material Science and Engineering, Xi''an University of Technology, Xi''an 710048, China and School of Material Science and Engineering, Xi''an University of Technology, Xi''an 710048, China |
| |
| Abstract: | Considering the welded joints which are made up ofpower hardening materials,the load-displacement curves of welded jointsof different mismatched strength and geometrical dimensions in planestrain were discussed by finite element method.And then,the fractureproperties of each mismatched welded joint Was analyzed using the COB-pliance-changing-rate method.In the end,the engineering estimate meth-od of the fracture factors and toughness of welded joints wss realizedthrouIgh curve simulations. |
| |
| Keywords: | welded joints fracture toughness compliance-chan-ging-rate method finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
