首页 | 本学科首页   官方微博 | 高级检索  
     

银色水性凹印油墨性能研究
引用本文:周腾飞,黄蓓青,魏先福. 银色水性凹印油墨性能研究[J]. 北京印刷学院学报, 2016, 24(4): 5-9. DOI: 10.3969/j.issn.1004-8626.2016.04.002
作者姓名:周腾飞  黄蓓青  魏先福
作者单位:北京印刷学院,北京,102600;北京印刷学院,北京,102600;北京印刷学院,北京,102600
摘    要:研究了银色颜料种类、颜基比、分散剂,成膜树脂种类等影响银色水性凹印油墨性能的因素,对分散性、光泽度、表面张力等油墨性能进行了研究和测试,获得性能良好的银色水性凹版油墨配方。实验表明:用铝粉颜料PHY20在颜基比为2∶3时制备出的粒径最小,满足凹版油墨的粒径要求;加入含量为2%的分散剂JL115A得到的油墨的分散效果最好;采用复合树脂813和S-2919的比例为16∶9时,油墨的综合性能最佳。

关 键 词:颜基比  成膜树脂  水性凹版油墨配方

Study on the Performance of Silver Water-based Gravure Ink
ZHOU Tengfei,HUANG Beiqing,WEI Xianfu. Study on the Performance of Silver Water-based Gravure Ink[J]. Journal of Beijing Institute of Graphic Communication, 2016, 24(4): 5-9. DOI: 10.3969/j.issn.1004-8626.2016.04.002
Authors:ZHOU Tengfei  HUANG Beiqing  WEI Xianfu
Affiliation:ZHOU Tengfei;HUANG Beiqing;WEI Xianfu;Beijing Institute of Graphic Communication;
Abstract:Factors affecting the performance of the silver water-based gravure ink such as types of silver pigments, pigment/binder ratio, type and dosage of dispersant, the type of film-forming resin are discussed. The properties of the ink such as dispersion, gloss, surface tension are fully studied. Finally, we obtain the formulation of silver water-based gravure ink with good quality. The experimental results show that the PHY20 a-luminum pigment is the most suitable pigment with the minimum particle size that meeting the requirement of the gravure printing ink, and its best pigment/binder ratio is 2 ∶3. The ink with right amount JL115A shows the best dispersion property. When the composite resin composed of film-forming resin 813 and S-2919 at the ratio of 16 ∶ 9 is used, the com-prehensive performance of the ink shows the best.
Keywords:pigment/binder ratio  film-forming resin  formulation of silver water-based gravure ink
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号