| 先进超高强马氏体钢的成形回弹控制 |
| |
| 引用本文： | 魏天海,赵亦希,胡星. 先进超高强马氏体钢的成形回弹控制[J]. 塑性工程学报, 2012, 19(3): 71-75 |
| |
| 作者姓名： | 魏天海 赵亦希 胡星 |
| |
| 作者单位： | 上海交通大学上海市数字化汽车车身重点实验室,上海,200240 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 先进超高强马氏体钢是汽车轻量化极具潜力的钢种,但其强度高、塑性低、成形回弹量大,成形精度难以保证。文章以有限元软件ABAQUS为平台,针对1500MPa级别马氏体钢开展回弹控制方法研究,并进行实验验证。研究表明,采用变压边力和成形拉伸(form drawing)均可有效抑制回弹,而后者表现了更好的回弹抑制效果,成形拉伸中的压边力加载时刻与压边力对回弹抑制效果影响较大。
|
| 关 键 词： | 先进超高强马氏体钢 回弹 成形拉伸 变压边力 |
The control of springback for forming of advanced ultra high strength martensitic steel |
| |
| WEI Tian-hai , ZHAO Yi-xi , HU Xing. The control of springback for forming of advanced ultra high strength martensitic steel[J]. Journal of Plasticity Engineering, 2012, 19(3): 71-75 |
| |
| Authors: | WEI Tian-hai ZHAO Yi-xi HU Xing |
| |
| Affiliation: | (Shanghai Key Laboratory of Digital Auto-body Engineering,Shanghai Jiao Tong University,Shanghai 200240 China) |
| |
| Abstract: | Advanced ultra high strength martensitic steel contains great potential for the lightweight of car,but it’s high strength,low plasticity and strong springback make it difficult to ensure the forming precision.The springback control technique for the 1500MPa level of martensitic steel by finite element simulation in ABAQUS was studied and verified by experiments.The results show that adopting VBHF and form drawing can effectively inhibit springback while the latter is more effective.During form drawing,the VBHF and the moment of loading BHF have a great effect on the result of springback inhibition. |
| |
| Keywords: | advanced ultra high strength martensitic steel springback form drawing VBHF |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
