| 立式车床改造与水轮机导叶轴孔同镗 |
| |
| 引用本文： | 戴仁华.立式车床改造与水轮机导叶轴孔同镗[J].四川水力发电,2001,20(1):79-81. |
| |
| 作者姓名： | 戴仁华 |
| |
| 作者单位： | 映秀湾水力发电总厂, |
| |
| 摘 要： | 我厂经过不断地探索实践，总结出了一套较完整的水轮机备品修复工艺，通过在立式车床上改装立式镗头后，成功地解决了水轮机顶盖，底环导叶轴孔同镗，因而提高了大修回装精度和速度，经济效益显著，对地处山区的水电厂有着推广的价值。
|
| 关 键 词： | 立式车床 导叶轴孔 同镗 水轮机 |
| 文章编号： | 1001-2184(2001)01-0079-03 |
| 修稿时间： | 1999年10月22 |
Vertical Lathe Rebuild and
Turbine Guide Vane Bearing Hole Bored Together |
| |
| DAI Ren-hua.Vertical Lathe Rebuild and
Turbine Guide Vane Bearing Hole Bored Together[J].Sichuan Water Power,2001,20(1):79-81. |
| |
| Authors: | DAI Ren-hua |
| |
| Abstract: | For Repair for spare parts of turbine,a series of more integrated repairing techniques are summarized by our plant through continuous research and practice .Vertical boring head is refitted on vertical lathe to bore turbine head cover and guide vane bearing hole on bottom ring together .In this way,precision and speed for back installation in general overhaul is improved and economic benefit is obvious.It is valuable to popularize this technique at power plants in a mountainous area. |
| |
| Keywords: | vertical lathe rebuild guide vane bearing hole bore together |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
