Phase morphology evolution and compatibilization of immiscible polyamide 6/polystyrene blends using nano‐montmorillonite |
| |
Authors: | Jianbing Guo Yang Xu Weidi He Na Wang Mengqi Tang Xiaolang Chen Shijun Hu Min He Shuhao Qin |
| |
Affiliation: | 1. National Engineering Research Center for Compounding and Modification of Polymer Materials, Guiyang, China;2. Key Laboratory of Advanced Materials Technology Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China |
| |
Abstract: | Nanocomposites of organic nano‐montmorillonite (nano‐OMMT)‐filled immiscible polyamide 6 (PA6)/polystyrene (PS) blends were prepared by three different processing methods. Masterbatch M1 of OMMT/PA6 and masterbatch M2 of OMMT/PS were prepared as separate masterbatchs by melt mixing with PA6 or PS, and then either mixed together or each mixed individually with appropriate amounts of PS or PA6, respectively. The effects of nano‐OMMT content and processing method on the structure, phase morphology, and mechanical properties of the PA6/PS/OMMT nanocomposites were investigated by X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, and mechanical properties tests. The results showed that the nano‐OMMT by M1 and M2 masterbatches dispersed primarily as exfoliated platelets in the PA6 matrix in the final composites regardless of the method of preparation. A drastic decrease of dispersed PS phase size and a very homogeneous size distribution were observed with the addition of nano‐OMMT. The PA6/PS/OMMT nanocomposites prepared from the M2 displayed the smallest dispersed PS phase size and best distribution of OMMT. The improvement of the mechanical properties of the PA6/PS/OMMT nanocomposites was attributed to the enhanced compatibilization of the immiscible PA6/PS blends by using nano‐OMMT. POLYM. ENG. SCI., 2017. © 2017 Society of Plastics Engineers |
| |
Keywords: | |
|
|