首页 | 本学科首页   官方微博 | 高级检索  
     

永磁同步电机直接转矩控制零矢量插入新方法
引用本文:朱卫华,杨向宇. 永磁同步电机直接转矩控制零矢量插入新方法[J]. 机电工程技术, 2005, 34(11): 27-30
作者姓名:朱卫华  杨向宇
作者单位:华南理工大学电力学院,广东,广州,510640;华南理工大学电力学院,广东,广州,510640
摘    要:通过对零电压矢量的分析,明确了零电压矢量在永磁同步电机控制过程中的作用,在对无零电压矢量和有零电压矢量的控制方式行比较的同时,提出了添加零矢量的双滞环方法,并介绍了控制系统中各个环节的MATLAB/Sinmlink建模方法,试验结果表明,双滞环零矢量控制系统转速,转矩响应性能都要优于传统有零矢量直接转矩控制系统。

关 键 词:永磁同步电机  零矢量  直接转矩  双滞环
文章编号:1009-9492(2005)11-0027-03
修稿时间:2005-03-04

A Novel Direct Torque Control Strategy of PMSM with Zero Voltage Vectors Applied
ZHU Wei-hua,YANG Xiang-yu. A Novel Direct Torque Control Strategy of PMSM with Zero Voltage Vectors Applied[J]. Mechanical & Electrical Engineering Technology, 2005, 34(11): 27-30
Authors:ZHU Wei-hua  YANG Xiang-yu
Abstract:The theory of direct torque control (DTC) with zero voltage vectors applied in permanent magnet synchronous motor (PMSM) is proposed in this paper. The function of zero voltage vectors is proposed in the control method. The comparison between DTC with zero vectors applied and DTC without ones is analyzed. A control scheme using zero voltage vectors with double hysteresis loops is put forward for DTC of PMSM. The model of DTC of PMSM based on MATLAB/Simulink is introduced. Simulation results indicate that the DTC with double hysteresis loops method is superior to the traditional controller in speed and torque response.
Keywords:PMSM  zero voltage vectors  DTC  double hysteresis
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号