首页 | 本学科首页   官方微博 | 高级检索  
     

100 Gbit/s CFP光收发模块的研究
引用本文:林韬,胡毅,张武平,陈晋敏. 100 Gbit/s CFP光收发模块的研究[J]. 光通信研究, 2012, 38(5): 43-45
作者姓名:林韬  胡毅  张武平  陈晋敏
作者单位:光纤通信技术和网络国家重点实验室,湖北武汉430074;武汉电信器件有限公司,湖北武汉430074
摘    要:随着网络流量的持续增长,100 Gbit/s以太网已开始商用,100 Gbit/s以太网的客户侧光模块为100 Gbit/s CFP(小型可插拔式)光收发模块。文章介绍了100 Gbit/s CFP光收发模块的相关标准,并给出了一种模块的设计方案。该模块由速率转换单元、发射单元、接收单元及控制单元组成。依照IEEE 802.3ba标准对模块进行了测试,结果显示该模块单通道发射平均光功率达到了1.47dBm,接收灵敏度达到了-9.5dBm,各项性能完全符合相关标准,能够应用于100 Gbit/s以太网中。

关 键 词:100 Gbit/s以太网  100 Gbit/s CFP光模块  CFP多源协议  IEEE802.3ba标准
收稿时间:2012-04-24

Research on 100 Gbit/s CFP optical transceiver modules
Lin Tao , Hu Yi , Zhang Wuping , Chen Jinmin. Research on 100 Gbit/s CFP optical transceiver modules[J]. Study on Optical Communications, 2012, 38(5): 43-45
Authors:Lin Tao    Hu Yi    Zhang Wuping    Chen Jinmin
Affiliation:1,2(1.State Key Laboratory of Optical Communication Technologies and Networks,Wuhan 430074,China; 2.Wuhan Telecommunication Device Co.,Ltd.,Wuhan 430074,China)
Abstract:With the sustained growth of internet traffic, 100 Gbit/s Ethernet has gradually become commercially available. .Its client optical module is a 100 Gbit/s CFP optical transceiver module. This paper introduces the relevant standard of this module and describes the design scheme of a kind of module, which consists of rate conversion unit, transmitting unit, receiving unit and control unit. Tests are performed in the light of IEEE Std.802.3ba and the results indicate that the average launch power in each lane is 1.47 dBm and the receiver sensitivity is -9.5 dBm. This means that the performances of this module entirely conform to the relevant standards and can be applied in 100 Gbit/s Ethernet.
Keywords:100 Gbit/s Ethernet  100 Gbit/s CFP optical module  CFP MSA  IEEE 802.3ba standard
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号