首页 | 本学科首页   官方微博 | 高级检索  
     

水性聚氨酯乳液的合成研究
引用本文:张军科. 水性聚氨酯乳液的合成研究[J]. 上海涂料, 2011, 49(10): 15-18
作者姓名:张军科
作者单位:陕西国防工业职业技术学院化学工程系,陕西西安,710300
基金项目:陕西国防工业职业技术学院科研基金资助项目
摘    要:以自制聚酯多元醇和过量的2,4-甲苯二异氰酸酯为原料进行预聚反应,合成含异氰酸酯端基的预聚体,再以二羟甲基丙酸为亲水剂,引入二元醇进行扩链反应,制备了水性聚氨酯。研究了残留-NCO含量及n-Nco/n—OH比值对乳液合成及性能的影响。研究认为:控制n-NCO/n—OH比值在2.0—2.5之间,残留一NCO含量在3.0%-3.5%之间时,制备的乳液性能最佳。

关 键 词:阴离子型水性聚氨酯  合成  乳化

Study on Synthesis of Waterborne Polyurethane Emulsion
ZHANG Jun-ke. Study on Synthesis of Waterborne Polyurethane Emulsion[J]. Shanghai Coatings, 2011, 49(10): 15-18
Authors:ZHANG Jun-ke
Affiliation:ZHANG Jun-ke ( Chemistry Engineering Department, Shanxi GuoFang Institute of Technology, Shanxi xi'an, 710300, China )
Abstract:A NCO-terminated polyurethane prepolymer was prepared by self-made polyester polyol and excessive toluene diisocyanate ( TDI ), and then using dimethanol propionic acid ( DMPA ) as hydrophilic agent, waterborne polyurethane were synthesized by cross-linking reaction. The effects of residual -NCO content and n_Nco/n_oH ratio on the synthesis and properties of the emulsion were studied. The results showed that when n-NCO/n-OH ratio was between 2.0 and 2.5, and residual -NCO content was between 3.0%-3.5%, the properties of the emulsion were perfect.
Keywords:anionic waterborne polyurethane  synthesis  emulsification
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号