| 锚具夹片连续锯削加工工艺研究 |
| |
| 引用本文： | 张晓东,赖玉活,李健,李新,李志敏,支凯宁.锚具夹片连续锯削加工工艺研究[J].机床与液压,2017,45(2):38-40. |
| |
| 作者姓名： | 张晓东 赖玉活 李健 李新 李志敏 支凯宁 |
| |
| 作者单位： | 1. 广西科技大学机械工程学院,广西柳州,545006;2. 柳州市数控机床研究所,广西柳州,545007 |
| |
| 摘 要： | 针对现有锯削加工方法存在不能连续锯削和加工效率低等问题,通过分析零件的特征提出一种连续锯削加工工艺,并且选择专用机床作为夹片锯削加工设备。制定了夹片连续锯削时的定位夹紧方案,确定了各项锯削参数。实践表明:该工艺过程安全平稳,零件的加工效率提高了37%,在同类型零件加工中具有一定的实践指导作用。
|
| 关 键 词： | 夹片 连续锯削 定位夹紧 加工工艺 |
| 收稿时间： | 2015/12/1 0:00:00 |
Study on Continuous Sawing Process for Anchorage Clip |
| |
| ZHANG Xiaodong,LAI Yuhuo,LI Jian,LI Xin,LI Zhimin,ZHI Kaining.Study on Continuous Sawing Process for Anchorage Clip[J].Machine Tool & Hydraulics,2017,45(2):38-40. |
| |
| Authors: | ZHANG Xiaodong LAI Yuhuo LI Jian LI Xin LI Zhimin ZHI Kaining |
| |
| Abstract: | In view of the existing sawing machining method can ’ t continuous sawing and processing efficiency is low , a continu-ous sawing processing method was proposed by analyzing the components , and special machine tool was chosen as the clip sawing pro-cessing equipment .The positioning and clamping scheme was formulated , and the cutting parameters were determined .Practice shows that the process is safe and smooth ,and the processing efficiency is increased by 37%.It has some practical guidance in similar parts machining . |
| |
| Keywords: | Clip Continuous sawing Positioning and clamping Processing technology |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
