| 超声振动切削超薄壁精密零件的粗糙度试验研究 |
| |
| 引用本文： | 焦锋,刘传绍,高国富,赵波. 超声振动切削超薄壁精密零件的粗糙度试验研究[J]. 现代制造工程, 2002, 0(7): 8-10 |
| |
| 作者姓名： | 焦锋 刘传绍 高国富 赵波 |
| |
| 作者单位： | 河南焦作工学院机械工程系,454000 |
| |
| 基金项目： | 河南省自然科学基金项目 ( 0 0 4 0 4 0 4 0 0 )，上海交大金属及复合材料重点实验室基金项目 |
| |
| 摘 要： | 对直径为 47.75mm壁厚为 0 .8～ 1 .5mm的照相机导向镜筒零件进行普通和超声车削试验 ,研究了各切削参数对此类超薄壁零件表面粗糙度的影响规律 ,也试验研究了超声振动切削时切削液及车刀对表面粗糙度的影响
|
| 关 键 词： | 超薄壁零件 超声车削 PCD刀具 表面粗糙度 切削液 |
| 文章编号： | 1671-3133(2002)07-0008-03 |
| 修稿时间： | 2002-03-28 |
Research on surface roughness of precise ultrathin-wall parts in ultrasonic vibration cutting |
| |
| Jiao Feng,Liu Chuanshao,Gao Guofu,Zhao Bo. Research on surface roughness of precise ultrathin-wall parts in ultrasonic vibration cutting[J]. Modern Manufacturing Engineering, 2002, 0(7): 8-10 |
| |
| Authors: | Jiao Feng Liu Chuanshao Gao Guofu Zhao Bo |
| |
| Abstract: | In the paper the experiments of cutting camera's guiding drawtube with 47.75mm diameter and 0.6 to 1.5mm wall thickness by means of ultrasonic vibration method and common method were carried out.The influence of every parameter on the surface roughness of the ultrathin wall part was researched.Furthermore,the influences of cutting fluid and cutting tools on the roughness were researched too.The conclusions are useful in machining such precise ultrathin wall parts. |
| |
| Keywords: | Ultrathin wall part Ultrasonic turning PCD tool Surface roughness Cutting fluid |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
