Bound water content of biological sludges in relation to filtration and dewatering

This paper presents the results of an extensive analytical investigation on the mechanisms involved in filtration of biological sludges by studying the changes in the “bound water” content of activated and mixed digested sludges when they were subjected to several physical, and chemical processes. A new method for determining bound water in sludges, based on differential thermal analysis (DTA), was developed which proved reliable and fast. Water in sludges exist in two states, as “free” or bulk water and as “bound” water which is held by the solid state either by sorption on specific sites, i.e. functional groups of the proteins and other macromolecules and/or restricted within pores and capillaries. Water binding by sludge displayed similar behaviour to the absorption of ions.All chemical coagulants (FeCl₃, AlCl₃, FeSO₄) and cationic polyelectrolytes resulted in a reduction of the specific resistance and the bound water content of the sludge which was due to the replacement of water molecules by the adsorbed coagulant. Heat treatment of activated and digested sludge at 130°C resulted in a reduction of bound water by 30% whereas freezing and thawing reduced bound water by 70%.