| 金属电弧喷涂快速制模工艺的研究 |
| |
| 引用本文： | 许巧玉.金属电弧喷涂快速制模工艺的研究[J].模具工业,2006,32(7):69-72. |
| |
| 作者姓名： | 许巧玉 |
| |
| 作者单位： | 新疆大学,机械工程学院,新疆,乌鲁木齐,830008 |
| |
| 摘 要： | 金属电弧喷涂快速制模工艺,是近几年发展起来的新技术,在制造业中发挥了越来越重要的作用。通过对其制模工艺的研究,得出了最佳的工艺参数,展望了快速模具制造技术的发展前景。
|
| 关 键 词： | 电弧喷涂 快速制模工艺 参数优化 |
| 文章编号： | 1001-2168(2006)07-0069-04 |
| 收稿时间： | 01 13 2006 12:00AM |
| 修稿时间： | 2006年1月13日 |
Research on metallic arc spraying technique for rapid mould making |
| |
| XU Qiao-yu.Research on metallic arc spraying technique for rapid mould making[J].Die & Mould Industry,2006,32(7):69-72. |
| |
| Authors: | XU Qiao-yu |
| |
| Affiliation: | College of Mechanical Engineering, Xinjiang University, Urumqi, Xinjiang 830008, China |
| |
| Abstract: | Metallic arc spraying for rapid mould making was a new technology developed in recent years which has played more and more important roles in manufacturing industry. Optimal technological parameters were found through researches on the mould making process, and the prospect of rapid mould making technology was introduced. |
| |
| Keywords: | electric arc spraying rapid mould making technique parameter optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
