Performance monitoring of Geosynthetic Reinforced Soil Integrated Bridge System (GRS-IBS) in Louisiana

The Geosynthetic Reinforced Soil (GRS) Integrated Bridge System (IBS) is an alternative design method to the conventional bridge support technology. Closely spaced layers of geosynthetic reinforcement and compacted granular fill material can provide direct bearing support for structural bridge members if designed and constructed properly. This new technology has a number of advantages including reduced construction time and cost, generally fewer construction difficulties, and easier maintenance over the life cycle of the structure. These advantages have led to a significant increase in the rate of construction of GRS-IBS structures in recent years. This paper presents details on the instrumentation plan, short-term behavior monitoring, and experiences gained from the implementation of the first GRS-IBS project in Louisiana. The monitoring program consisted of measuring bridge deformations, settlements, strains along the reinforcement, vertical and horizontal stresses within the abutment, and pore water pressures. In this paper, the performance of instrumentation sensors was evaluated to improve future instrumentation programs. Measurements from the instrumentations also provide valuable information to evaluate the design procedure and the performance of GRS-IBS bridges. The instrumentation readings showed that the magnitude and distribution of strains along the reinforcements vary with depth. The locus of maximum strains in the abutment varied by the surcharge load and time that did not corresponds to the (45+?/2) line, especially after the placement of steel girders. A comparison was made between the measured and theoretical value of thrust forces on the facing wall. The results indicated that the predicted loads by the bin pressure theory were close to the measured loads in the lower level of abutment. However, the bin pressure theory under predicted the thrust loads in the upper layers with reduced reinforcement spacing. In general, the overall performance of the GRS-IBS was within acceptable tolerance in terms of measured strains, stresses, settlements and deformations.