首页 | 本学科首页   官方微博 | 高级检索  
     

采用Fenton试剂预处理糠醛废水的研究
引用本文:金玉涛,王少波,原培胜,尹晓峰,徐宇峰.采用Fenton试剂预处理糠醛废水的研究[J].给水排水,2009,35(Z2).
作者姓名:金玉涛  王少波  原培胜  尹晓峰  徐宇峰
作者单位:1. 河北工程大学城建学院,邯郸,056038
2. 中国船舶重工集团公司第七一八研究所,邯郸,056027
摘    要:采用Fenton试剂处理糠醛废水,主要考察了H_2O_2/Fe~(2+)的投配比、H_2O_2投加量、H_2O_2的投加方式和反应时间对废水COD和BOD去除率的影响.通过试验确定最佳反应条件为:H_2O_2/Fe~(2+)的投配比2∶1、H_2O_2投加量0.5 Q、H_2O_2分5批投加、反应时间80 min的条件下,糠醛废水的BOD/COD由原始的0.23提高到0.65左右,COD_(cr)去除率在52%左右.

关 键 词:糠醛废水  Fenton试剂法  预处理

Study on pretreatment of furfural wastewater by Fenton reagent
Jin Yutao,Wang Shaobo,Yuan Peisheng,Yin Xiaofeng,Xu Yufeng.Study on pretreatment of furfural wastewater by Fenton reagent[J].Water & Wastewater Engineering,2009,35(Z2).
Authors:Jin Yutao  Wang Shaobo  Yuan Peisheng  Yin Xiaofeng  Xu Yufeng
Abstract:The Fenton reagent method has been used for treating furfural wastewater, the main influential factors which could affect the removal of COD and BOD, such as mass ratio of H_2O_2 and Fe~(2+), adding quantity of H_2O_2, adding mode of H_2O_2 and reaction time were investigated. The results show that the optimum conditions are as follows: mass ratio of H_2O_2∶Fe~(2+)=2∶1,adding quantity of H_2O_2=0.5Q,number of adding is 5,reaction time=80 min.Under these conditions, biodegradability of furfural wastewater has been improved from original 0.23 to 0.65, the removal rate of COD_(Cr) are 52%.
Keywords:Furfural wastewater  Fenton reagent  Pretreatment
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号