| Cf/C复合材料与纯铜的胶接辅助钎焊连接 |
| |
| 引用本文： | 赵磊, 侯金保, 李晓红. Cf/C复合材料与纯铜的胶接辅助钎焊连接[J]. 焊接, 2018, (1): 46-48. |
| |
| 作者姓名： | 赵磊 侯金保 李晓红 |
| |
| 作者单位： | 航空工业北京航空制造工程研究所; |
| |
| 摘 要： | 采用胶接辅助钎焊方法，以TiH2粉为活性元素源，环氧树脂为粘性载体，Ag-Cu共晶合金为钎料，Cu箔为应力缓冲层材料，实现了Cf/C复合材料与纯铜的钎焊连接，结果表明，接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物，其结构可表示为(Cf/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出，在930 ℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。
|
| 关 键 词： | Cf/C复合材料 Cu 钎焊 |
| 收稿时间： | 2017-06-21 |
Active cement added brazing of Cf/C composites to copper |
| |
| Zhao Lei, Hou Jinbao, Li Xiaohong. Active cement added brazing of Cf/C composites to copper[J]. WELDING & JOINING, 2018, (1): 46-48. |
| |
| Authors: | Zhao Lei Hou Jinbao Li Xiaohong |
| |
| Abstract: | Cf/C composites was bonded with copper effectively through active cement added brazing process using TiH2power for active element, epoxy resin for stickiness, Ag-Cu eutectic alloy for filler metal, and copper foil for interlayer. The results show that four reaction products generated in the brazed joint, namely as TiC, TiCu, Ag(s,s) and Cu(s,s). The interfacial microstructure of joint can be described as (Cf/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu. The maximum shear strength is 30 MPa for the joint brazed at 930 ℃ for 25 minutes. |
| |
| Keywords: | Cf/C composites copper brazing |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接》浏览原始摘要信息 |
|
点击此处可从《焊接》下载全文 |
|
