| 数控车削刀具的刃磨引起的刀尖半径补偿的误差分析 |
| |
| 引用本文： | 韦洪喜. 数控车削刀具的刃磨引起的刀尖半径补偿的误差分析[J]. 煤矿机械, 2009, 30(12) |
| |
| 作者姓名： | 韦洪喜 |
| |
| 作者单位： | 黑龙江技师学院,黑龙江,鸡西,158100 |
| |
| 摘 要： | 在数控车床上加工圆锥面或圆弧面间的配合件时,通常采用刀具的半径补偿,由于刀具的刀尖刃磨质量不同,在采用刀具的半径补偿时,会引起尺寸精度的误差,以至于引起配合精度降低。
|
| 关 键 词： | 刀沿形状 刀尖圆弧半径 半径补偿 刀位点 编程原理 |
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools |
| |
| Abstract: | When processing the surface of a cone or the arc surfaces of cooperating parts,the radius recompense of cutting tools usually were used.Becaue of the differences of weight of shape of cutting tools,use the radius recompense of cutting tools,were used the inaccuracy of the measurements precision will be caused,so that they cause the cooperating decreasing. |
| |
| Keywords: | cutting tool shape cone radius of cutting tools points radius recompense position point of cutting tools program principle |
| 本文献已被 万方数据 等数据库收录！ |
|
