| 数控加工工艺与刀具应用研究的探讨 |
| |
| 引用本文： | 胡吕平. 数控加工工艺与刀具应用研究的探讨[J]. 浙江水利水电专科学校学报, 2005, 17(1): 38-39 |
| |
| 作者姓名： | 胡吕平 |
| |
| 作者单位： | 浙江水利水电专科学校,浙江,杭州,310018 |
| |
| 摘 要： | 通过试验论证合适的刀具选择、合理的转速、进给量和切削深度与提高切削效率,降低加工成本的关系.给出提高数控加工工艺的有效方法.
|
| 关 键 词： | 数控 加工效率 刀具 |
| 文章编号： | 1008-536X(2005)01-0038-02 |
| 修稿时间： | 2004-12-20 |
Investigation of Application of Numerical Control Cutting Arts and Cutlery |
| |
| HU Lv-ping. Investigation of Application of Numerical Control Cutting Arts and Cutlery[J]. Journal of Zhejiang Water Conservancy and Hydropower College, 2005, 17(1): 38-39 |
| |
| Authors: | HU Lv-ping |
| |
| Abstract: | From a lot of experimentations,the relations between the selection of the cutlery,reasonable rotation speed, amount of feed and cutting depth and the cutting efficiency as well as the processing cost are discussed,and a effective way to improve the numerical control cutting arts is suggested. |
| |
| Keywords: | numerical control cutting efficiency cutlery |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
