| 型钢高强混凝土柱抗剪性能的试验与分析 |
| |
| 引用本文： | 李俊华,薛建阳,王新堂,赵鸿铁.型钢高强混凝土柱抗剪性能的试验与分析[J].工业建筑,2007,37(3):90-94. |
| |
| 作者姓名： | 李俊华 薛建阳 王新堂 赵鸿铁 |
| |
| 作者单位： | 1. 宁波大学,建筑工程与环境学院,宁波,315221
2. 西安建筑科技大学,土木工程学院,西安,710055 |
| |
| 基金项目： | 浙江省宁波市青年博士基金
,
浙江省宁波市自然科学基金
,
浙江省教育厅科学研究计划项目 |
| |
| 摘 要： | 通过对20个混凝土抗压强度为65.3~84.9MPa的型钢高强混凝土柱在轴力和水平荷载共同作用下的试验,对型钢高强混凝土柱的抗剪性能进行研究。试验主要考虑剪跨比、轴压比、配箍率和混凝土强度4个参数对构件抗剪性能的影响。由试验得到水平荷载下型钢高强混凝土柱的破坏形态,对剪跨比、轴压比、配箍率和混凝土强度对构件抗剪承载能力的影响进行分析,提出型钢高强混凝土柱抗剪承载能力的计算公式,该公式与我国现行混凝土结构设计规范中的斜截面承载能力计算公式相衔接,且计算结果偏于安全,可直接用于工程设计。
|
| 关 键 词： | 型钢高强混凝土 柱 抗剪性能 破坏形态 抗剪承载力 |
| 修稿时间： | 2006-10-20 |
EXPERIMENT AND ANALYSIS ON SHEAR PERFORMANCE OF STEEL REINFORCED HIGH-STRENGTH CONCRETE COLUMNS |
| |
| Li Junhua,Wang Xintang,Xue Jianyang,Zhao Hongtie.EXPERIMENT AND ANALYSIS ON SHEAR PERFORMANCE OF STEEL REINFORCED HIGH-STRENGTH CONCRETE COLUMNS[J].Industrial Construction,2007,37(3):90-94. |
| |
| Authors: | Li Junhua Wang Xintang Xue Jianyang Zhao Hongtie |
| |
| Abstract: | Based on twenty specimens with concrete strength varied from 65.3MPa to 84.9MPa subjected to constant axial compression force and horizontal load,the shear performance of steel reinforced high-strength concrete columns is studied.Four factors,that is shear span ratio,axial compression ratio,stirrup ratio and grade of concrete strength,are taken into consideration.Failure patterns of specimens are obtained and it is analyzed the influence of shear span ratio,axial compression ratio,stirrup ratio and grade of concrete strength on shear performance of steel reinforced high-strength columns.A calculating formula for shear bearing capacity of steel reinforced high-strength columns is presented.This formula is consistent with the formula for shear strength in the current code(GB 500102002),whose calculating results tend to be safe. |
| |
| Keywords: | steel reinforced high-strength concrete column shear performance failure patterns shear bearing capacity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
