| 换热管与管板液压胀接的数值研究 |
| |
| 引用本文： | 刘敏珊,王素珍,董其伍,刘彤.换热管与管板液压胀接的数值研究[J].化工设备与管道,2007,44(4):30-34. |
| |
| 作者姓名： | 刘敏珊 王素珍 董其伍 刘彤 |
| |
| 作者单位： | 郑州大学热能工程研究中心,郑州,450002 |
| |
| 摘 要： | 液压胀接技术是目前比较有效的保证换热管与管板紧密连接的技术。本文利用ANSYS建立有限元平面模型,分析液压胀接过程中的应力应变特点,接触压力等,并计算了胀接压力卸除后换热管与管板之间的残余接触压力。得出液压胀接时管板外径对胀管的接触压力和残余接触压力影响不大等结论。
|
| 关 键 词： | ANSYS 液压胀接 胀接压力 接触压力 残余接触压力 |
| 文章编号： | 1009-3281（2007）04-0030-05 |
| 修稿时间： | 2007-02-06 |
Numerical Research of Hydraulic Expanding Connection between Tubesheet and Tubes |
| |
| Liu Minshan,Wang Suzhen,Dong Qiwu,Liu Tong.Numerical Research of Hydraulic Expanding Connection between Tubesheet and Tubes[J].Process Equipment & Piping,2007,44(4):30-34. |
| |
| Authors: | Liu Minshan Wang Suzhen Dong Qiwu Liu Tong |
| |
| Affiliation: | Research Center of Heat Energy, Zhengzhou University, Zhengzhou 450002 |
| |
| Abstract: | The hydraulic expanding technology is effective to make sure the close joint between the tube and the tubesheet.In this paper,one model was established by use of ANSYS,then,the stress-strain state and the contact pressure during the hydraulic expanding process were analyzed.Also,the residual contact pressure,when the hydraulic expanding pressure was unloaded,was calculated.It can be concluded that the diameter of the tubesheet has little influence on the contact pressure and the residual contact pressure. |
| |
| Keywords: | ANSYS hydraulic expanding connection expansion pressure contact pressure residual contact pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
