| 搅拌摩擦加工法制备碳纳米管增强铝基复合材料 |
| |
| 引用本文： | 赵霞,柯黎明,徐卫平,刘鸽平. 搅拌摩擦加工法制备碳纳米管增强铝基复合材料[J]. 复合材料学报, 2011, 28(2): 185-190 |
| |
| 作者姓名： | 赵霞 柯黎明 徐卫平 刘鸽平 |
| |
| 作者单位： | 1.南昌航空大学 航空制造工程学院, 南昌 330063; |
| |
| 基金项目： | 国家自然科学基金资助项目(50674056) |
| |
| 摘 要： | 为了制备晶粒细小、 组织均匀的复合材料, 提高材料的力学性能, 用搅拌摩擦加工法制备碳纳米管增强铝基复合材料, 并对不同碳纳米管含量的复合材料的微观结构、 拉伸性能及断口形貌进行分析。结果表明: 碳纳米管添加到铝基体中, 搅拌摩擦中心区晶粒细小, 碳纳米管与基体之间结合良好, 未发现明显的缺陷; 碳纳米管对基材有明显的强化作用, 铝基复合材料抗拉强度随着碳纳米管含量的增加而提高; 碳纳米管体积分数为7%时, 抗拉强度达到201 MPa, 是基材的2.2倍; 复合材料在宏观上呈现脆性断裂特征, 微观上呈现韧性断裂特征, 其断裂机制以CNTs/Al界面脱粘、 基体撕裂和增强体断裂为主。
|
| 关 键 词： | 搅拌摩擦加工 碳纳米管 铝基复合材料 显微结构 拉伸强度 |
| 收稿时间： | 2010-03-23 |
Carbon nanotubes reinforced aluminum matrix composites by friction stir processing |
| |
| ZHAO Xia,KE Liming,XU Weiping,LIU Geping. Carbon nanotubes reinforced aluminum matrix composites by friction stir processing[J]. Acta Materiae Compositae Sinica, 2011, 28(2): 185-190 |
| |
| Authors: | ZHAO Xia KE Liming XU Weiping LIU Geping |
| |
| Affiliation: | 1.School of Aeronautical Manufacturing and Engineering, Nanchang Hangkong University, Nanchang 330063, China;2.Manufacturing Department, Jiang Ling Motors Corporation, Nanchang 330001, China |
| |
| Abstract: | In order to prepare composites with fine grains,uniform microstructure,and improving the mechanics performance significantly,different contents of carbon nanotubes(CNTs) reinforced aluminum matrix composites were prepared by friction stir processing(FSP).The microstructure,tensile properties and morphologies of tensile fracture surface were analyzed.The results show that CNTs are embedded in the aluminum matrix.The grain size is fine in the center of the friction stir zone.CNTs and matrix have a good combin... |
| |
| Keywords: | friction stir processing(FSP) CNTs aluminum matrix composites microstructure tensile strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
|
