| L360QS/316L不锈钢复合钢管焊接工艺和性能研究 |
| |
| 引用本文： | 付现桥,徐敬,卜明哲,刘志田,项祖义,郭旭. L360QS/316L不锈钢复合钢管焊接工艺和性能研究[J]. 焊管, 2014, 37(2): 48-52. DOI: １００１－３９３８（２０１4）02-0048-05 |
| |
| 作者姓名： | 付现桥 徐敬 卜明哲 刘志田 项祖义 郭旭 |
| |
| 作者单位： | （中国石油集团工程设计有限责任公司华北分公司，河北 任丘 062522） |
| |
| 摘 要： | 介绍了?准355.6 mm×(10+3) mm规格L360QS+316L不锈钢复合钢管的新型焊接工艺，即首先采用TIG焊在复合钢管管端进行堆焊预处理，然后再采用氩气保护TIG焊进行对焊操作。为评价环焊缝的性能，焊后对其焊接接头进行了拉伸试验、冲击试验、硬度测试、晶间腐蚀及应力腐蚀试验。试验结果表明，采用该工艺焊接的L360QS+316L不锈钢复合钢管环焊缝焊接接头性能良好，且具备耐晶间腐蚀和应力腐蚀性能；堆焊层起到了很好的隔离作用，保证了焊缝的质量。
|
| 关 键 词： | 不锈钢 复合钢管 堆焊 气体保护焊 硬度 |
Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe |
| |
| Fu Xianqiao,XU Jing,BU Mingzhe,LIU Zhitian,XIANG Zuyi,GUO Xu. Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe[J]. Welded Pipe and Tube, 2014, 37(2): 48-52. DOI: １００１－３９３８（２０１4）02-0048-05 |
| |
| Authors: | Fu Xianqiao XU Jing BU Mingzhe LIU Zhitian XIANG Zuyi GUO Xu |
| |
| Affiliation: | （North China Branch of Engineering Design Co.,Ltd ,China Petrol Group,Renqiu 062522,Hebei,China） |
| |
| Abstract: | This paper described new welding process on the L360QS/316L clad pipe with size of ？355.6mm ×（10＋3） mm. Firstly, it adopted TIG welding to conduct overlaying on the pipe end, and then, using TIG welding process for butt welding with argon gas protection. The tensile strength, charpy impact test, hardness, intergranular corrosion test and SCC were carried out to study the properties of the circumferential weld. The results indicated that the welded joint performance of the circumferential weld is good; it is with resistance to intergranular corrosion and stress corrosion. The overlay welding layer plays a good role in isolation function to ensure the weld quality. |
| |
| Keywords: | stainless steel clad pipe overlay welding gas shielded welding hardness |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《焊管》浏览原始摘要信息 |
|
点击此处可从《焊管》下载全文 |
|
