首页 | 本学科首页   官方微博 | 高级检索  
     

不同配煤比和堆密度对焦炭界面结合强度影响的实验研究
引用本文:魏宝忠,赵洪荣,刘,涛.不同配煤比和堆密度对焦炭界面结合强度影响的实验研究[J].煤化工,2014(2):36-39.
作者姓名:魏宝忠  赵洪荣    
作者单位:山东钢铁股份公司莱芜分公司焦化厂,山东莱芜271100
摘    要:采用4种常规炼焦煤,在不同配比及堆密度下进行配煤炼焦实验,利用不同测试手段,对所得焦炭界面结合强度进行研究。实验结果表明:配煤炼焦过程中,当堆密度不变时,随着配煤中黏结性组分含量的提高,焦炭界面结合强度有增加的趋势;当肥煤和焦煤分别与瘦煤和气煤配合炼焦配比不变时,随着堆密度的提高,焦炭界面结合强度有增加的趋势;当堆密度为0.95 g/cm3、焦煤与气煤按4:6配煤炼焦时,所得焦炭界面结合强度BSSI达到最高值76.36%。

关 键 词:焦炭  界面结合强度  配比  堆密度

Experimental Study of the Impact of Different Coal Blending Ratio and Bulk Density on the Interracial Bonding Strength of the Coke
Wei Baozhong,Zhao Hongrong and Liu Tao.Experimental Study of the Impact of Different Coal Blending Ratio and Bulk Density on the Interracial Bonding Strength of the Coke[J].Coal Chemical Industry,2014(2):36-39.
Authors:Wei Baozhong  Zhao Hongrong and Liu Tao
Affiliation:(Coking Plant of Laiwu Branch, Shandong Iron & Steel Co., Ltd., Laiwu Shandong 271100, China)
Abstract:Coking tests were done with various blending ratio and bulk density for 4 conventional coking coals, and the results of which were studied with different test means on their relevant interfacial bonding strength. The results were as follows: when the bulk density kept constant, the interfacial bonding strength of the coke tended to increase with the increase of the binder component in the coal. While the blending ratio kept constant, the interfacial bonding strength of the coke tended to increase with the increase of its bulk density. When the bulk density was 0.95 g/cm3 and the blending ratio between the coking coal and the gas coal was 4:6, the interfacial bonding strength reached 76.36% which was its maximum value.
Keywords:coke  interfacial bonding strength  blending ratio  bulk density
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号