| 氨基涂料系列产品开发与配方设计 |
| |
| 引用本文： | 陈昌炽.氨基涂料系列产品开发与配方设计[J].中国涂料,2012(11):66-68. |
| |
| 作者姓名： | 陈昌炽 |
| |
| 作者单位： | 江门职业技术学院 |
| |
| 摘 要： | 试验选用异丁醇醚化的三聚氰胺甲醛树脂分别与醇酸树脂、环氧树脂和丙烯酸树脂进行复配制漆,对这3类氨基涂料综合性能进行了考察。试验表明,当与醇酸树脂复配时树脂配比为1∶3、溶剂用量在6%～10%时涂膜性能较好;与环氧树脂复配时树脂配比为3∶1时涂膜性能最佳,添加萘酸钙催干效果较好;与含羟基丙烯酸树脂复配时树脂配比为1∶3时涂膜性能最佳。
|
| 关 键 词： | 氨基树脂 醇酸树脂 环氧树脂 丙烯酸树脂 配比 |
Formulation Design and Product Development of Melamine Coatings |
| |
| Affiliation: | Chen Changzhi(Jiangmen Polytechnic Institute,Jiangmen 529000,Guangdong,China) |
| |
| Abstract: | Through applying i-butylated melamine-formaldehyde resin with alkyd resin,epoxy resin and acrylic resin at different mixture ratio to formulate coatings,the tests mainly analyze the comprehensive performances of the three kinds of melamine coatings.The test results prove that when the mixture ratio of i-butylated melamine-formaldehyde resin and alkyd resin at 1∶3,the solvent consumption among 6%～10%,the coatings film performance is better.When the mixture ratio of i-butylated melamine-formaldehyde resin and epoxy resin at 3∶1,the coatings film performance is better while adding calcium naphthenate as dryer.When the mixture ratio of i-butylated melamine-formaldehyde resin and acrylic resin(including hydroxyl group) at 1∶3,the coatings film performance is worse. |
| |
| Keywords: | melamine resin alkyd resin epoxy resin acrylic resin mixture ratio |
| 本文献已被 CNKI 等数据库收录！ |
|
