首页 | 本学科首页   官方微博 | 高级检索  
     

增韧增强PP复合材料的研究
引用本文:周媛,谢雁,刘新民,潘炯玺.增韧增强PP复合材料的研究[J].合成树脂及塑料,2005,22(2):11-13,22.
作者姓名:周媛  谢雁  刘新民  潘炯玺
作者单位:青岛科技大学高分子工程材料研究所,山东,青岛,266042;青岛科技大学高分子工程材料研究所,山东,青岛,266042;青岛科技大学高分子工程材料研究所,山东,青岛,266042;青岛科技大学高分子工程材料研究所,山东,青岛,266042
摘    要:研究了聚丙烯(PP)种类,增韧剂丙烯-辛烯共聚物、苯乙烯-丁二烯-苯乙烯嵌段共聚物,三元乙丙橡胶(SBS/EPDM)和CaCO3用量对PP复合材料性能的影响。结果表明:以PP EPF30M为基体树脂,SBS/EPDM为增韧剂,CaCO3为增强剂。当添加SBS/EPDM质量分数为25%,CaCO3质量分数为19%时,制得的增韧增强PP复合材料满足PP汽车保险杠专用料的要求。

关 键 词:聚丙烯  丙烯-辛烯共聚物  碳酸钙  增韧  增强  汽车保险杠
文章编号:1002-1396(2005)02-0011-04

Study on toughened and reinforced PP composite material
Zhou Yuan,Xie Yan,Liu Xinmin,Pan Jiongxi.Study on toughened and reinforced PP composite material[J].China Synthetic Resin and Plastics,2005,22(2):11-13,22.
Authors:Zhou Yuan  Xie Yan  Liu Xinmin  Pan Jiongxi
Abstract:This paper studied the effects of varieties of polypropylene (PP) and amounts of propylene-octene as toughener, styrene-butadiene-styrene block copolymer/ethylene-propylene-dimer monomer (SBS/EPDM) and calcium carbonate on the performance of PP composite material. The results show that when taking PP EPF30M as basic resin, SBS/EPDM (mass fraction of 25%) as toughener and calcium carbonate (mass fraction of 19%) as reinforcer, the toughened and reinforced PP composite so prepared is able to meet the requirements of speciality material for automobile bumper.
Keywords:polypropylene  propylene-octene copolymer  calcium carbonate  toughening  reinforcing  automobile bumper
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号