| 角锥喇叭天线制造工艺 |
| |
| 引用本文： | 谢颖然,李元生,佟文清,胡江华.角锥喇叭天线制造工艺[J].电子工艺技术,2007,28(3):169-170,173. |
| |
| 作者姓名： | 谢颖然 李元生 佟文清 胡江华 |
| |
| 作者单位： | 1. 南京航空航天大学,江苏,南京,210016;中国电子科技集团公司第三十八研究所,安徽,合肥,230031
2. 中国电子科技集团公司第三十八研究所,安徽,合肥,230031 |
| |
| 摘 要： | 介绍了不同频段、不同尺寸的角锥喇叭天线成型方法,针对传统成型方法一些不足之处以及产品轻量化设计的要求,对喇叭的成型方法又提供了三种新的制造工艺,即电子束焊、真空钎焊及碳纤维复合材料成型法.
|
| 关 键 词： | 角锥喇叭天线 电子束焊接 真空钎焊 |
| 文章编号： | 1001-3474（2007）03-0169-03 |
| 修稿时间： | 2007-03-28 |
Manufacturing Technics of Pyramidal Horn Antenna |
| |
| XIE Ying-ran,LI Yuan-sheng,TONG Wen-qing,HU Jiang-hua.Manufacturing Technics of Pyramidal Horn Antenna[J].Electronics Process Technology,2007,28(3):169-170,173. |
| |
| Authors: | XIE Ying-ran LI Yuan-sheng TONG Wen-qing HU Jiang-hua |
| |
| Affiliation: | 1. CETC No. 38 Research Institute,Hefei 230031 ,China; 2. Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | Introduce forming methods for different frequency and different sizes pyramidal horn antenna. According to some disadvantages for traditional forming method and request of light design, put forward three methods of new manufacturing technics - Electron - Beam Welding,Vacuum brazing and Carbon fibre reinforced plastic figuration method. |
| |
| Keywords: | Pyramidal horn antenna Electron - Beam Welding Vacuum brazing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
