| 大口径直缝焊管整圆定径工艺过程的数值模拟 |
| |
| 引用本文： | 潘鑫,陈鹏,钱勇,李延丰. 大口径直缝焊管整圆定径工艺过程的数值模拟[J]. 钢管, 2009, 38(5): 70-73 |
| |
| 作者姓名： | 潘鑫 陈鹏 钱勇 李延丰 |
| |
| 作者单位： | 西南交通大学材料学院,四川,成都,610031;中国石油集团渤海装备钢管制造公司,河北,青县,062658 |
| |
| 摘 要： | 对断面椭圆度较大的大口径直缝焊管采用机械扩径法进行整圆,仍存在不足之处。介绍了一种新的大口径直缝焊管整圆定径方法,即用2个半圆形模具对焊管施压,使其周长产生0.5%左右的永久变形以达到整圆定径之目的;通过对此方法进行数值模拟验证,为大口径直缝焊管整圆定径设备的研制生产及其工艺的制定提供了理论依据。
|
| 关 键 词： | 大口径直缝焊管 椭圆度 整圆 定径 数值模拟 |
Numerical Simulation of Rounding-sizing Process of Large-sized Straight Welded Pipe |
| |
| Pan Xin,Chen Peng,Qian Yong,Li Yanfeng. Numerical Simulation of Rounding-sizing Process of Large-sized Straight Welded Pipe[J]. Steel Pipe, 2009, 38(5): 70-73 |
| |
| Authors: | Pan Xin Chen Peng Qian Yong Li Yanfeng |
| |
| Affiliation: | Pan Xin1,Chen Peng1,Qian Yong2,Li Yanfeng2 ( 1. Material School,Southwest Jiaotong University,Chengdu 610031,China,2. Bohai Equipment Steel Pipe Manufacture Co.,Ltd.,CNPC,Qingxian 062658,China ) |
| |
| Abstract: | Certain advantages still stay with the mechanical expanding process for rounding of the large-sized straight welded pipes with rather big sectional ovality. A newly-developed rounding-sizing process for the said pipes is described,which involves pressing the pipe with two half-round dies to produce approximately 0.5% circumferential permanent deformation for the purpose of rounding-sizing of the pipe. The process is verified by means of numerical simulation. The result is worth using as the theoretic basis ... |
| |
| Keywords: | Large-sized straight welded pipe Ovality Rounding Sizing Numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
