K‐dominance of static crack tip in functionally gradient materials

K‐dominance of static crack tip in functionally gradient materials (FGMs) with a crack oriented along the direction of the elastic gradient is studied through coherent gradient sensing (CGS), digital speckle correlation method (DSCM) and finite element method (FEM). In the direction of crack propagation, the shear modulus has a linear variation with constant mass density and Poisson's ratio. First, the CGS and DSCM governing equations related to the measurements and the elastic solutions at mode I crack in FGMs are obtained in terms of the stress intensity factor, material constants and graded index. Secondly, two kinds of FGMs specimens and one homogenous specimen are prepared to observe the influences of the property variation on the K‐dominance. Then, CGS and DSCM experiments using three‐point‐bending of FGMs and homogenous beams are performed. Thirdly, based on the results of the experiments, the stress intensity factors of three kinds of specimens are calculated by CGS and DSCM. Meanwhile, the stress intensity factors are obtained by FEM. Finally, comparing the results from CGS, DSCM and FEM, the K‐dominance of mode‐I static crack tip in FGMs is discussed in detail.