| 长玻璃纤维增强尼龙6的力学性能研究 |
| |
| 引用本文： | 刘正军,韩克清,周洪梅,杜秉公,余木火.长玻璃纤维增强尼龙6的力学性能研究[J].工程塑料应用,2005,33(5):4-8. |
| |
| 作者姓名： | 刘正军 韩克清 周洪梅 杜秉公 余木火 |
| |
| 作者单位： | 东华大学材料学院,上海,200051;东华大学材料学院,上海,200051;东华大学材料学院,上海,200051;东华大学材料学院,上海,200051;东华大学材料学院,上海,200051 |
| |
| 摘 要： | 采用一种新的熔融浸渍工艺制备了长玻纤增强尼龙6复合材料，研究了玻纤含量、玻纤长度分布对复合材料力学性能的影响。结果表明，在玻纤质量分数为50％时复合材料的拉伸强度为234MPa，弯曲强度为349MPa，弯曲弹性模量为11．4GPa，缺口冲击强度为313J／m，综合力学性能明显优于短玻纤增强尼龙6复合材料。
|
| 关 键 词： | 长玻璃纤维 尼龙6 增强 熔融浸渍 热塑性复合材料 |
| 修稿时间： | 2005年2月22日 |
STUDIES ON MECHANICAL PROPERTIES OF LONG GLASS FIBER REINFORCED PA6 |
| |
| Liu Zhengjun,Han Keqing,Zhou Hongmei,Du Binggong,Yu Muhuo.STUDIES ON MECHANICAL PROPERTIES OF LONG GLASS FIBER REINFORCED PA6[J].Engineering Plastics Application,2005,33(5):4-8. |
| |
| Authors: | Liu Zhengjun Han Keqing Zhou Hongmei Du Binggong Yu Muhuo |
| |
| Abstract: | The long glass fiber reinforced PA6 was prepared by using a new melt impregnation process. Influences of the glass fiber content and distribution to the composite were studied. The results showed that when the glass fiber content was 50%, the tensile strength of the composite was 234 MPa, flexural strength was 349 MPa, flexural modules was 11.4 GPa, notched impact strength was 313 J/m. Its mechanical performance was obviously superior to that of commerical glass fiber reinforced PA6 composites. |
| |
| Keywords: | long glass fiber nylon 6 reinforcing melt impregnation thermoplastic composite |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
