| 外插齿刀设计方法的改进 |
| |
| 引用本文： | 杨有亮. 外插齿刀设计方法的改进[J]. 工具技术, 1996, 30(2): 2-4 |
| |
| 作者姓名： | 杨有亮 |
| |
| 作者单位： | 第一拖拉机工程机械公司齿轮厂 |
| |
| 摘 要： | 本文对外齿轮插齿刀常规设计方法加以改进，克服了常规设计的试凑法，使设计效率大大提高，设计时间缩短２／３左右。
|
| 关 键 词： | 外插齿刀，插齿刀设计，外齿轮加工 |
Improvement about the Design Method of External Gear Shaper Cutter |
| |
| Yang Youliang. Improvement about the Design Method of External Gear Shaper Cutter[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 1996, 30(2): 2-4 |
| |
| Authors: | Yang Youliang |
| |
| Affiliation: | Yang Youliang |
| |
| Abstract: | The conventional design method of external gear shaper cotter is improvedin this peper. The design efficiency is greatly developed, and the design time is shortened 2/3. |
| |
| Keywords: | external gear shaper cutter shaper cutter design external gear machining |
| 本文献已被 CNKI 维普 等数据库收录！ |
