首页 | 本学科首页   官方微博 | 高级检索  
     


The investigation of a compressible laminar boundary layer past an elliptical cone
Authors:VN Vetlutsky  VL Ganimedov
Affiliation:Institute of the Theoretical and Applied Mechanics, USSR Academy of Sciences, Novosibirsk 630090, U.S.S.R.
Abstract:The self-similar boundary layer on a sharp circular cone was calculated first by Vvedenskaya1]. The boundary layer equations were solved in a plane containing an outflow line which lies in this case in the symmetry plane at the leeward side, and after that a solution was constructed by using a marching method along a circumferential coordinate. The calculation results for the boundary layer on an elliptic cone were presented in Bashkin's papers 2–4]. However, only the middle angles of attack (30–50°) were considered. where the outflow line of an external stream is located in the windward symmetry plane, and the flow pattern in the boundary layer is analogous to that of the circular cone. In the present the laminar boundary layer on an elliptic cone is studied for a wide range of angles of attack. The boundary layer has been calculated at small incidence when the outflow of an external flow were located out of the symmetry plane. In this case the equations are solved first in the plane containing the outflow line and then the solutions were constructed by a marching method along a circumferentialcoordinate to the windward and leeward symmetry planes. The distribution of the skin-friction coefficients and the Stanton's numbers on a cone surface was given. The similarity solution of a set of boundary layer equations was obtained for thin cones at large incidence when the stream on the windward side of the cone was directed to the cone nose. The calculations of the laminar boundary layer at hypersonic velocities were carried out to include the real equilibrium properties of the air.
Keywords:
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号