| 成形条件对PAN原丝微孔结构及热性能的影响 |
| |
| 引用本文： | 董瑞蛟,赵炯心,张幼维,吴承训,潘鼎. 成形条件对PAN原丝微孔结构及热性能的影响[J]. 合成纤维工业, 2009, 32(3) |
| |
| 作者姓名： | 董瑞蛟 赵炯心 张幼维 吴承训 潘鼎 |
| |
| 作者单位： | 东华大学纤维材料改性国家重点实验室,上海,201620;东华大学纤维材料改性国家重点实验室,上海,201620;东华大学纤维材料改性国家重点实验室,上海,201620;东华大学纤维材料改性国家重点实验室,上海,201620;东华大学纤维材料改性国家重点实验室,上海,201620 |
| |
| 基金项目： | 973项目，国家自然科学基金重点项目，上海市科委重大基础理论项目 |
| |
| 摘 要： | 将不同浓度的聚丙烯腈(PAN)原液在不同凝固浴温度下进行湿法纺丝,制得PAN原丝,再将PAN原丝在沸水浴中进行5倍拉伸。探讨了成形条件以及拉伸对PAN原丝微孔结构及热性能的影响。结果表明:当PAN纺丝原液质量分数为22%,凝固浴温度为10℃时,可以得到结构均匀致密的PAN原丝。PAN原丝经5倍拉伸后热分解温度降低,残留量减小。
|
| 关 键 词： | 聚丙烯腈原丝 微孔结构 相分离 成形 热性能 |
Effect of formation conditions on microcellular structure and thermal property of PAN precursor |
| |
| Dong Ruijiao,Zhao Jiongxin,Zhang Youwei,Wu Chengxun,Pan Ding. Effect of formation conditions on microcellular structure and thermal property of PAN precursor[J]. China Synthetic Fiber Industry, 2009, 32(3) |
| |
| Authors: | Dong Ruijiao Zhao Jiongxin Zhang Youwei Wu Chengxun Pan Ding |
| |
| Affiliation: | State Key Laboratory for Modification of Chemical Fibers and Polymer Materials;Donghua University;Shanghai 201620 |
| |
| Abstract: | Polyacrylonitrile(PAN)precursor was prepared from PAN spinning solution of different concentration at different coagulation bath temperature via wet spinning process and was subsequently exposed to 5-time drawning in boiling water bath.The effects of the formation conditions and drawing process on the microcellular structure and thermal property of PAN precursor were discussed.The results showed that the PAN precursor with uniform and compact structure can be produced when the mass fraction of PAN spinning ... |
| |
| Keywords: | polyacrylonitrile precursor microcellular structure phase separation formation thermal property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
