HfO2 etching mechanism in inductively-coupled Cl2/Ar plasma |
| |
| Authors: | Moonkeun KimAlexander Efremov Hyun Woo LeeHyung-Ho Park MunPyo HongNam Ki Min Kwang-Ho Kwon |
| |
| Affiliation: | a Department of Control and Instrumentation Engineering, Korea University, Chungnam 339-700, Republic of Koreab Department of Electronic Devices and Materials Technology, State University of Chemistry and Technology, 7 F. Engels St., 153000 Ivanovo, Russiac Department of Computer and Applied Physics, Hanseo University, Chungnam 356-706, Republic of Koread Department of Materials Science and Engineering, Yonsei University, Seoul 120-749, Republic of Koreae Department of Display and Semiconductor Physics, Korea University, Chungnam 339-700, Republic of Korea |
| |
| Abstract: | Etching characteristics and the mechanism of HfO2 thin films in Cl2/Ar inductively-coupled plasma were investigated. The etch rate of HfO2 was measured as a function of the Cl2/Ar mixing ratio in the range of 0 to 100% Ar at a fixed gas pressure (6 mTorr), input power (700 W), and bias power (300 W). We found that an increase in the Ar mixing ratio resulted in a monotonic decrease in the HfO2 etch rate in the range of 10.3 to 0.7 nm/min while the etch rate of the photoresist increased from 152.1 to 375.0 nm/min for 0 to 100% Ar. To examine the etching mechanism of HfO2 films, we combined plasma diagnostics using Langmuir probes and quadrupole mass spectrometry with global (zero-dimensional) plasma modeling. We found that the HfO2 etching process was not controlled by ion-surface interaction kinetics and formally corresponds to the reaction rate-limited etch regime. |
| |
| Keywords: | Etch rate HfO2 Etch mechanism Plasma modeling |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
