首页 | 本学科首页   官方微博 | 高级检索  
     

泪滴状铝纳米结构紫外-近红外宽带吸收体的制备
引用本文:李刚,黄丽清,蔡亚坤,张宇,商富强,刘悠,张磊,董伟丽,王慧敏,刘斌胜. 泪滴状铝纳米结构紫外-近红外宽带吸收体的制备[J]. 材料科学与工程学报, 2021, 39(2): 175-180. DOI: 10.14136/j.cnki.issn1673-2812.2021.02.001
作者姓名:李刚  黄丽清  蔡亚坤  张宇  商富强  刘悠  张磊  董伟丽  王慧敏  刘斌胜
作者单位:西安交通大学理学院,物质非平衡合成与调控教育部重点实验室,陕西 西安 710049;武警工程大学基础部,陕西 西安 710086
基金项目:国家自然科学基金面上资助项目;陕西省重点研发计划-工业一般资助项目;国家自然科学基金重大资助项目
摘    要:宽波段光吸收体在太阳能利用、光探测等领域具有重要的应用价值.本研究以带铝基的多孔氧化铝(AAO)膜为模板,采用真空电子束蒸镀技术,结合后续的高温退火、湿化学刻蚀和胶带剥离等处理过程,制备出了泪滴状铝纳米结构宽带吸收体,其吸收率在200~980 nm的波长范围内均高于93%,在紫外光谱区的吸收带宽大于文献中报道的单一金属...

关 键 词:泪滴状铝纳米结构  宽带吸收体  阳极氧化铝模板  电子束蒸镀

Preparation of Teardrop-shaped Al Nanostructure Broadband Absorber in UV to Near-infrared Regions
LI Gang,HUANG Liqing,CAI Yakun,ZHANG Yu,SHANG Fuqiang,LIU You,ZHANG Lei,DONG Weili,WANG Huimin,LIU Binsheng. Preparation of Teardrop-shaped Al Nanostructure Broadband Absorber in UV to Near-infrared Regions[J]. Journal of Materials Science and Engineering, 2021, 39(2): 175-180. DOI: 10.14136/j.cnki.issn1673-2812.2021.02.001
Authors:LI Gang  HUANG Liqing  CAI Yakun  ZHANG Yu  SHANG Fuqiang  LIU You  ZHANG Lei  DONG Weili  WANG Huimin  LIU Binsheng
Affiliation:(Non-equilibrium Condensed Matter and Quantum Engineering Laboratory,School of Science,Xi'an Jiaotong University,Xi'an 710049,China;Basic department of CAPF of Engineering University,Xi'an 710086,China)
Abstract:Broadband optical absorbers have important application value in solar energy utilization,optical detection and other technical fields.Teardrop-shaped surface nanostructured aluminum broadband absorber was prepared by vacuum electron beam evaporating combined with subsequent high temperature annealing,wet chemical etching and tape stripping using porous anodic aluminum oxide(AAO)membranes as a template in this paper.The absorbance of as-prepared teardrop-shaped Al nanostructure absorber is higher than 93%in the wavelength range of 200-980 nm and the absorption spectral bandwidth in the ultraviolet region is larger than reported single metal broadband absorbers.In addition,as prepared aluminum broadband absorber is of very good time stability due to the native oxide layer formed on its surface.The preparation approach developed in this paper can realize a high efficiency,low cost scaled fabrication of the surface nanostructured aluminum broadband absorber and provides a new way for developing the single metal broad band absorber.
Keywords:Teardrop-shaped aluminum nanostructures  Broadband absorber  Anodic aluminum oxide templates  Electron beam evaporation
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号