| 基于Autoform的PD模块快速构建冲压件工艺补充的研究 |
| |
| 引用本文： | 张军.基于Autoform的PD模块快速构建冲压件工艺补充的研究[J].模具制造,2021,21(1):30-32. |
| |
| 作者姓名： | 张军 |
| |
| 作者单位： | 一汽模具制造有限公司,吉林长春130000 |
| |
| 摘 要： | 以某车型后门外板及翼子板为例,结合冲压件典型特征,对基于Autoform的PD模块快速构建冲压件工艺补充进行了详细的阐述。
|
| 关 键 词： | 冲压件 工艺补充 Autoform 翼子板 |
Research on Rapid Construction of Stamping Process Supplement Based on Autoform PD Module |
| |
| Zhang Jun.Research on Rapid Construction of Stamping Process Supplement Based on Autoform PD Module[J].Die & Mould Manufacture,2021,21(1):30-32. |
| |
| Authors: | Zhang Jun |
| |
| Affiliation: | (Faw Tooling Die Manufacturing Co.,Ltd.,Changchun,Jilin 130000,CHN) |
| |
| Abstract: | Take the rear door outer panel and fender of a certain vehicle as an example,combined with typical features of stamping parts,based on Autoform PD module to quickly build stamping process supplement is described in detail. |
| |
| Keywords: | stamping parts process supplement Autoform software fender |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
