| 改善H13系列热作模具扁钢退火组织的工艺研究 |
| |
| 引用本文： | 孙盛宇,付博,赵腾飞,叶世圣. 改善H13系列热作模具扁钢退火组织的工艺研究[J]. 模具制造, 2021, 21(1): 76-79 |
| |
| 作者姓名： | 孙盛宇 付博 赵腾飞 叶世圣 |
| |
| 作者单位： | 东北特殊钢集团股份有限公司技术中心,辽宁大连116105;东北特殊钢集团股份有限公司第二轧钢厂,辽宁大连116105 |
| |
| 摘 要： | 高端H13系列扁钢的退火组织应满足北美压铸协会标准《NADCA#207》或热作工具钢显微检验标准?SEP1614?的要求,某公司H13系列扁钢退火组织一次合格率仅为79%,通过调整钢锭的高温扩散工艺、增大扁钢轧后在线冷却强度及延长等温球化退火保温时间等工艺措施成功改善了带状偏析、液析碳化物、退火组织均匀性等问题,一次合格率提升至98%以上。
|
| 关 键 词： | H13钢 热作模具扁钢 高温扩散 在线冷却 等温球化退火 带状偏析 液析碳化物 |
Investigation on the Process of Improving the Annealing Structure of H13 Hot Working Die Flat Steel |
| |
| Sun Shengyu,Fu Bo,Zhao Tengfei,Ye Shisheng. Investigation on the Process of Improving the Annealing Structure of H13 Hot Working Die Flat Steel[J]. Die & Mould Manufacture, 2021, 21(1): 76-79 |
| |
| Authors: | Sun Shengyu Fu Bo Zhao Tengfei Ye Shisheng |
| |
| Affiliation: | (Technical Center of Dongbei Special Steel Group Co.,Ltd.,Dalian,Liaoning 116105,CHN;The Second Rolling Mill Plant of Dongbei Special Steel Group Co.,Ltd.,Dalian,Liaoning 116105,CHN) |
| |
| Abstract: | The annealing structure of high quality H13 flat steel should match the Standard《NADCA#207》of north american die-casting association or《SEP1614》of microscopic inspection standard for hot tool steel.The first time yield of H13 flat steel annealing structure only 79%.The problems of band segregation,primary carbide and uniformity of annealing structure were improved successfully by improve the high temperature diffusion process of ingot,increasing the on-line cooling strength of flat steel after rolling and prolonging the time of isothermal spheroidizing annealing,the first time yield of annealing structure got up to 98% or more. |
| |
| Keywords: | H13 steel hot die flat steel high temperature diffusion on-line cooling isothermal spheroidizing band segregation primary carbide |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
