| 高性能覆铜板用聚苯醚/环氧树脂体系 |
| |
| 引用本文： | 田勇,皮丕辉,文秀芳,程江,杨卓如.高性能覆铜板用聚苯醚/环氧树脂体系[J].塑料科技,2006,34(2):1-4. |
| |
| 作者姓名： | 田勇 皮丕辉 文秀芳 程江 杨卓如 |
| |
| 作者单位： | 华南理工大学化工与能源学院,广东,广州,510640 |
| |
| 摘 要： | 简要介绍了高性能覆铜板对基材的性能要求及聚苯醚和环氧树脂分别作为覆铜板基材的优缺点;PPE/EP是具有最高上临界温度的体系,详细讨论了PPE的分子量和用量、相容剂以及改性PPE对PPE/EP体系相容性的影响。采用PPE/EP体系制得的覆铜板(如RG-200)比传统的FR-4覆铜板的介电性能和耐热性能均有大幅度的提高。
|
| 关 键 词： | 聚苯醚 环氧树脂 覆铜板 介电性能 |
| 文章编号： | 1005-3360(2006)02-0001-04 |
| 收稿时间： | 2005-06-14 |
| 修稿时间： | 2005年6月14日 |
Polyphenylene Ether/Epoxy Resin Used for High Performance Copper Clad Laminate |
| |
| Tian Yong,Pi Pihui,Wen Xiufang,Cheng Jiang,Yang Zhuoru.Polyphenylene Ether/Epoxy Resin Used for High Performance Copper Clad Laminate[J].Plastics Science and Technology,2006,34(2):1-4. |
| |
| Authors: | Tian Yong Pi Pihui Wen Xiufang Cheng Jiang Yang Zhuoru |
| |
| Affiliation: | College of Chemical Engineering and Energy, South China University of Technology, Guangzhou 510640, China |
| |
| Abstract: | It briefly introduced the requirement of high performance copper clad laminate(CCL) for matrix resin,as well as the advantages and disadvantages of polyphenylene ether(PPE) and epoxy resins(EP) respectively used for the matrix resion of CCL.PPE/EP system exhibits an upper critical solution temperature(UCST) behavior.It discussed in detail the influencing effects of the molecular weight and the use amount of PPE,compatilizer and the modified PPE on the compatibility of PPE/EP system.The dielectric properties and heat resistance of the CCL(RG-200) prepared by PPE/EP system are much better than those of the conventional CCL(FR-4). |
| |
| Keywords: | Polyphenylene ether Epoxy Copper clad laminate Dielectric properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
