| 金属材料维氏硬度测量不确定度的评定 |
| |
| 引用本文： | 胡水江,李生初,杨航飞,徐利军. 金属材料维氏硬度测量不确定度的评定[J]. 金属制品, 2009, 35(1): 59-60 |
| |
| 作者姓名： | 胡水江 李生初 杨航飞 徐利军 |
| |
| 作者单位： | 绍兴市质量技术监督检测院,浙江,绍兴,312071;绍兴市质量技术监督检测院,浙江,绍兴,312071;绍兴市质量技术监督检测院,浙江,绍兴,312071;绍兴市质量技术监督检测院,浙江,绍兴,312071 |
| |
| 摘 要： | 维氏硬度测量的不确定度主要来源于试验力、压痕对角线重复性、标准块不均匀性及硬度计本身;建立维氏硬度与试验力、压痕深度的数学模型,指出维氏硬度与试验力成正比,与压痕深度的平方成反比;根据GB/T4340.1—1999,从试验力、压痕、标准块等几个影响因素分析,计算出当包含因子Kp=2,置信区间为95%时,维氏硬度测量的不确定度为2.5%。
|
| 关 键 词： | 不确定度 维氏硬度 测量 评定 |
Uncertainty evaluation of metal material Vickers hardness measurement |
| |
| HU Shui-jiang,LI Sheng-chu,YANG Hang-fei,XU Li-jun. Uncertainty evaluation of metal material Vickers hardness measurement[J]. Steel Wire Products, 2009, 35(1): 59-60 |
| |
| Authors: | HU Shui-jiang LI Sheng-chu YANG Hang-fei XU Li-jun |
| |
| Affiliation: | Shaoxing Testing Institute of Quality and Technical Supervision;Shaoxing 312071;China |
| |
| Abstract: | The uncertainty of Vickers hardness is from testing force, repeatability of indentation diagonal line, standard block inhomogeneity and hardness tester. The mathematical model of Vickers hardness and testing force, indentation depth is established. Vickers hardness is proportional to testing force, in inverse proportion to square of indentation depth. According to GB/T 4340.1--1999 ,to analyze from following influence factors such as testing force, indentation and standard block, when coverage factor Kp is 2, confidence interval is 95% , the uncertainty of Vickers hardness measurement is 2.5%. |
| |
| Keywords: | uncertainty Vickers hardness measurement evaluation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
