| 微细电火花加工实验及工艺规律研究 |
| |
| 引用本文： | 于云霞. 微细电火花加工实验及工艺规律研究[J]. 电加工与模具, 2004, 0(3): 24-26 |
| |
| 作者姓名： | 于云霞 |
| |
| 作者单位： | 胜利石油学校,山东东营,257000 |
| |
| 摘 要： | 微细电火花加工在当前微细加工中显示出巨大的发展潜力。通过用自行研制的微细电火花加工系统进行的一系列微细电欠花加工实验，对影响微细电火花加工加工效率和加工精度的各种因素(如充放电电容、开路电压和工作介质等)进行了研究，
|
| 关 键 词： | 电火花加工 微细加工 加工效率 加工精度 充放电电容 开路电压 工作介质 |
| 修稿时间： | 2004-02-16 |
The technical study and tests of micro-EDM machining |
| |
| Yu Yunxia. The technical study and tests of micro-EDM machining[J]. Electromachining & Mould, 2004, 0(3): 24-26 |
| |
| Authors: | Yu Yunxia |
| |
| Abstract: | Micro-EDM shows its great application on micro-machining currently,In this paper,a string of tests of micro-EDM were made by the micro-EDM system which was developed by ourselves,and the study of the effects of parameters,such as capacitance,open voltage and dielectric,on material removal rate and machining accuracy has been carried out. |
| |
| Keywords: | micro-machining micro-EDM machining efficiency machining precision |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
