| 镍基高温合金定向粗化行为的有限元分析 |
| |
| 引用本文： | 杨永清,周丽,张嘉易.镍基高温合金定向粗化行为的有限元分析[J].沈阳理工大学学报,2009,28(3):42-45,49. |
| |
| 作者姓名： | 杨永清 周丽 张嘉易 |
| |
| 作者单位： | 沈阳理工大学机械工程学院,辽宁,沈阳,110168 |
| |
| 摘 要： | 镍基高温合金广泛应用于燃气轮机的叶片、涡轮盘和燃烧室等高温部件．针对镍基单晶高温合金的服役条件和结构特点，采用有限元方法建立数学模型，有限元分析时用热膨胀系数代替正负错配的选择，用柔度矩阵的计算表达单元各向异性，并计算静水压力（hydrostatic pressure）及等效应力（von Mises stress）分布，研究负错配的情况下镍基高温合金在111]取向上受载时γ’颗粒的定向粗化行为，结果表明γ’颗粒的粗化方向及形态依赖于应力轴取向．
|
| 关 键 词： | 镍基单晶高温合金 定向粗化 点阵错配 |
Finite Element Analysis of Directional Coarsening in Ni-based Superalloy |
| |
| YANG Yong-qing,ZHOU Li,ZHANG Jia-yi.Finite Element Analysis of Directional Coarsening in Ni-based Superalloy[J].Transactions of Shenyang Ligong University,2009,28(3):42-45,49. |
| |
| Authors: | YANG Yong-qing ZHOU Li ZHANG Jia-yi |
| |
| Affiliation: | Shenyang Ligong University;Shenyang 110168;China |
| |
| Abstract: | The nickel base heat-resisting alloy is widely used in high temperature parts,on the gas turbine blade,turbine disk and combustion chamber.According to the service conditions and structural characteristic of nickel base single crystal superalloy,the finite element method is used for establishment of mathematical model.Using the finite element analysis,the thermal-expansion coefficient is used for replacing the positive and negative wrong matches,and the unit aeolotropy is expressed with the flexibility matr... |
| |
| Keywords: | nickel base single crystal superalloy directinoal coarsening lattice misfit |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
