首页 | 本学科首页   官方微博 | 高级检索  
     


Kinetic studies on extra heavy crude oil upgrading using nanocatalysts by applying CFD techniques
Authors:Javad Aminian Dehkordi  Arezou Jafari  Seyyed Amir Sabet  Fatemeh Karami
Affiliation:1.Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran;2.Islamic Azad University, Shahrood, Iran
Abstract:Regarding the growth of global energy consumption and the paucity of light crude oil,extracting and using heavy and extra heavy crude oil has received much more attention,but the application of this kind ofoil is complicated due to its very high molecular weight.High viscosity and low flowability complicate the transportation of heavy and extra heavy crude oil.Accordingly,it is essential to reduce the viscosity of heavy and extra heavy crude oil through in-situ operations or immediate actions after extraction to reduce costs.Numerical simulations are influential methods,because they reduce calculation time and costs.In this study,the cracking of extra heavy crude oil using computational fluid dynamics is simulated,and a unique kinetic model is proposed based on experimental procedures to predict the behavior of extra heavy crude oil cracking reaction.Moreover,the hydrodynamics and heat transfer of the system and influence of nanocatalysts and temperature on the upgrading of crude oil are studied.The geometry of a reactor is produced using commercial software,and some experiments are performed to examine the validity and accuracy of the numerical results.The findings reveal that there is a good agreement between the numerical and experimental results.Furthermore,to investigate the main factors affecting the process,sensitivity analysis is adopted.Results show that type of catalyst and concentration of catalyst are the parameters that influence the viscosity reduction of extra heavy crude oil the most.The findings further revealed that when using a 25 nm SiO2 nanocatalyst,a maximum viscosity reduction of 98.67% is observed at 623 K.Also,a catalyst concentration of 2.28wt% is best for upgrading extra heavy crude oil.The results obtained through sensitivity analysis,simulation model,and experiments represent effectual information for the design and development of high performance upgrading processes for energy applications.
Keywords:Upgrading  Extra heavy oil  Simulation  Nanocatalyst
本文献已被 CNKI 万方数据 ScienceDirect 等数据库收录!
点击此处可从《中国化学工程学报》浏览原始摘要信息
点击此处可从《中国化学工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号